Turn Your EV Battery Into Usable AC Power PowerBridge Pro for North America

There are three ways to confirm whether your EV is compatible with PowerBridge Pro:

1. Check our Tested compatibility list and submit your vehicle information if your model is not listed.
2. Search for your vehicle in our EV Compatibility page
3. Contact support team before ordering if you are unsure.

If your vehicle has already been tested and listed as compatible, it can work with PowerBridge Pro. If your vehicle has not been tested yet, you may Contact support team to join our compatibility volunteer testing program.

Under normal portable use, PowerBridge Pro should not affect your vehicle warranty because it works as an external EV power device and does not require vehicle disassembly, rewiring, software modification, or permanent changes to the vehicle.

Yes. PowerBridge Pro is designed as an external portable EV power device for compatible CCS-enabled electric vehicles. It works through the vehicle-side charging and communication pathway and does not require vehicle disassembly, rewiring, or permanent modification.

For safe use, always follow the user manual, stay within the rated output limits, keep the unit and connectors dry, and use properly rated cables and equipment.

PowerBridge Pro for North America provides 120V outlet power and 240V single-phase AC output, with up to 7,500W of total output power.

It can support selected essential loads, appliances, tools, outdoor devices, camping equipment, mobile work equipment, and emergency backup loads, as long as the total load stays within the rated output.

Actual runtime depends on your EV battery size, state of charge, connected load, and vehicle settings.

Yes. During a power outage, PowerBridge Pro can power plug-in appliances directly within its rated output limits, such as refrigerators, lights, routers, laptops, small appliances, power tools, camping equipment, and other essential loads.

For plug-in appliances, no home electrical modification is required.

For North American home panel, generator inlet, transfer switch, interlock, or selected-circuit applications, PowerBridge Pro’s 240V output is single-phase 240V with no neutral. It is not standard split-phase 120/240V home power.

To use the full 240V / 7,500W output with a North American 120/240V split-phase home electrical setup, an external split-phase autotransformer may be required depending on the setup.

Any setup involving a home electrical panel, generator inlet, transfer switch, interlock, selected circuits, or household wiring must be evaluated and installed by a licensed electrician according to local electrical codes.

For plug-in appliances, no installation or electrical modification is required. PowerBridge Pro can be used as a portable EV backup power device within its rated output limits.

For North American home panel, generator inlet, transfer switch, interlock, or selected-circuit setups, PowerBridge Pro’s 240V output is single-phase 240V with no neutral. It is not standard U.S. split-phase 120/240V home power.

To support a North American 120/240V split-phase home electrical setup, an external split-phase autotransformer may be required depending on the setup.

Any setup involving a home electrical panel, generator inlet, transfer switch, interlock, selected circuits, or household wiring must be evaluated and installed by a licensed electrician according to local electrical codes.

PowerBridge Pro offers a different type of backup power than a gas generator or traditional battery station. It does not store energy inside the unit and does not use fuel. Instead, it helps you access backup power from the EV battery you already own.

Compared with gas generators, PowerBridge Pro is quieter, produces no exhaust during operation, and does not require gasoline storage.

Compared with many portable battery stations, PowerBridge Pro can access a much larger energy source because EV battery packs are typically much larger than standalone portable power stations.

It is not a fuel-powered generator or a whole-home backup system. Output power and runtime depend on your EV battery, vehicle settings, and connected loads.

PowerBridge Pro has recently completed its Kickstarter campaign, and we are now arranging production for pre-order customers.

During the current pre-order period, PowerBridge Pro is expected to be delivered before August 2026. As a pre-order bonus, U.S. orders include one extra year of extended warranty, a $129 value, for a total of 2 years of warranty coverage.

After the pre-order period ends, our standard policy will apply: 1-year limited warranty and 30-day return policy.

If you experience any issue, please contact RoamEnergy support and our team will help review your order, warranty status, and next steps.